Operator Codes For The WB3IGM 146.73 Repeater

Link Two Codes:

Link Two Receive: 74 74(Memory Channel #)
Link Two Receive and Transmit: 75*
Link Two Off: 76
Link Two Frequency Change: 74example
Example: 743*9003 This changes the frequency of the remote to 443.900
1 = minus split
2 = simplex
3 = plus split

Link Two Power Interrogate: 74*
Link Two High Power: 74*1
Link Two Low Power: 74*0
Link One and Two Pl Code: 77XX
The XX should be replaced with the two digit code for the appropriate PL that you want.

Example: For a PL of 173.8 enter the appropriate two digit code of 28.
If you need to pass tones to linked repeaters you must press the # key before the hitting the tones you wish to pass. Otherwise
the 146.730 machine will mute the tones so they don’t go out to the linked repeater.

Example: If you are linked to 147.00 and want to make a autopatch call on the 147.00 repeater you must start the
sequence with a # so that the 146.73 machine passes the tones out through the links to the 147.00 repeater.

Remember that when you are linked to another repeater or Node you are a guest on their system,
so act accordingly.

PLEASE NOTE THAT ALTHOUGH THIS IS AN OPEN REPEATER
THESE CODES ARE ONLY FOR THE USE OF MEMBERS ONLY

Donations accepted